AWWA
Ball Valves (metal seated)
Ideal for pump control check valve applications, this
Ball Valve is in full conformance with AWWA C507. Stainless
to Monel Seating, and trunnion mounted ball. |
Butterfly
Valves (Streamseal®)
(275k)
Cast, fabricated, or rubber-covered, Streamseal® Butterfly
Valves are designed for all heavy-duty flow control applications.
Sizes 24” to 192” and larger. Conforms with
AWWA C-504. |
|
Check Valves
Quiet-closing, rubber seated,
swing check valves are engineered for heavy-duty service.
Variety of models, including single or double, cushioned,
and increasing level and weight. Sizes 3” to 24”;
3” x 4”,
4” x 6”, 6” x 8”, 8” x 10”,
and 10” x 12” . Also Silent Check Valves,
Wafer Swing Check Valves, Ball Check Valves, and Rubber
Lined Swing Check Valves.
Please visit GA
Industries for more information.
|
|
Cone Valves (Rotovalve®)
(453k)
Designed to provide the most reliable, safe, low-maintenance
service in a variety of applications, the Rotovalve
is ideal for pump discharge/check service and many other
applications. "Lift and turn" operation virtually
eliminates seat wear.
Also,
Rotovalve "20 Questions".
(137k)
Rotovalve Remanufacturing.
(61k)
|
|
Energy Dissipating Valves
(Anti-Cavitation)
(in-line-service) Modified differential piston design
for anti-cavitation. Ideal for severe throttling service,
where high differentials normally produce cavitation
effects, and to reduce and minimize noise level on high
velocity applications. Sizes 4" to 36".
Please visit GA
Industries for more information.
|
Fixed
Cone Valves (Howell-Bunger®
& Ring-Jet)
(139k)
Howell-Bunger and Ring Jet Valves are proven performers
for water under free discharge. The radial discharge capacity
of the valve eliminates the need to overcome hydrostatic
forces common to most valves. Designed to pass a controlled
amount of water downstream with no damage to the immediate
environment. Sizes 4” and larger, heads to 1000’. |
Flap
Valves
(500k)
Circular and Rectangular Flap
Valves are designed to withstand the stresses resulting
from high seating head and to maintain sensitivity to
unseating heads. Designed for sewage treatment, water
purification, drainage projects, dry locks, locks, and
many other applications. Flexible flap valves also available. |
Flexible
Flap Valves
(125k)
Designed for all water and wastewater
applications. Simple, uncomplicated design suited for
gravity flow or pump discharge applications. |
|
Flow Control Valves
Designed for air/water cushioning
to prevent water hammer, with droptight closing and
full pipe opening. May be equipped with two-piece piston
to prevent backflow. Sizes 2” to 36”, with
Class 125 or Class 250 flanges, as required.
Please visit GA
Industries for more information.
|
Pump
Control Valves
Ball, cone or electric checks
to control surge on pump start/stop and modulate flow. |
Rectangular
Butterfly Valves (Streamseal®)
(450k)
In the Streamseal® tradition, the rectangular butterfly
valve offers reliable and economical service. Standard
sizes, or custom designed for your application. |
Tilting
Disc Check Valves
Low head loss for clean water
service. Quick open. Sizes 6” to 60”. |
 |
